---

How To Reset The Airbag Warning Light on a P11-144

 

If for any reason you have made your airbag light come on, by removing the steering wheel, or an airbag fitted seat, you can reset the system using the following procedure:

1. Open drivers door and turn ignition on

2. press the drivers door switch 5 times within 7 seconds

3. The airbag control unit is now in diagnostics mode

4. Turn the ignition off and wait for 15 seconds

The diagnostic fault codes will have now been erased, if the problem persists, then there is an actual fault in the airbag system.